Home > Cleaning Machine

  • Fixture Cleaner SMT Cleaning Equipment Finishing Clean Rinse Dry Automatically,CW-5100
Fixture Cleaner SMT Cleaning Equipment Finishing Clean Rinse Dry Automatically,CW-5100

Fixture Cleaner SMT Cleaning Equipment Finishing Clean Rinse Dry Automatically,CW-5100

  • Product description: Fixture Cleaner SMT Cleaning Equipment Finishing Clean Rinse Dry Automatically,CW-5100
  • INQUIRY

Cleaning Machine and Artificial / Ultrasonic Cleaning Fixture Comparison:

Condenser cleaning

Manual or ultrasonic cleaning

Comparing results

Automatic cleaning,100% safe

Charged cleaning or artificial iron brush cleaning+solution,poor safety

Batch cleaning,fast and efficient

Cleaning time is long,low efficiency

One-touch operation,no need to special cleaning staff

Iron brush fixture,dirty,tired,need special cleaning personal

Up and down,around the full range of cleaning,cleaning thoroughly,high cleanliness

Condenser on the dead ends,the surface dirty cleaning difficult

Solution cycle repeated repeated use

High Cleaning costs

Spay cleaning and rinsing,governance well intact

Iron brush cleaning will be raised,the surface off the phenomenon,the impact of follow-up product quality

Cleaning +rinse+dry,after cleaning the surface without solvent

No rinse,after cleaning solvent residue,after the use of heat when the smell out after the smell out

Specifications of High Cleaning Efficiency SMT Cleaning Equipment Fixture Cleaning,CW-5100:

• Cleaning basket size :Φ1000mm× 200mm(H) , Maximum cleaning height :450mm, Special size should be customized

• Cleaning fluid capacity :80L( maximum )

• Rinse fluid capacity :80L( maximum )

• Cleaning method : Spray Rotary Cleaning

• Dry way : Compressed air dry

• Recommended cleaning time :3-15mins

• Recommended cleaning and drying time :2-3mins

• Recommended rinse time :1-2mins

• Recommended drying time :3-6mins

• Cleaning filter : Using 3-level filtration

• Class 1 filter 2mm( Filter debris )

• Level 2 filter :100um( Primary filter flux, iron and other lumps )

• Level 3 filter 20um( Filter flux, rosin and so on )

• Air supply :0.5~ 0.7Mpa

• Air consumption :800-1000L/min

• Outlet size :Φ130mm(W)×60mm(H)

• dimension :1550mm(L) ×1780mm(W) ×1730mm(H)

CW-5100 Advantages of Cleaning the Rule:

1. One-touch operation,no need to special cleaning staff

2. Batch cleaing,cleaning fast and efficient

3. No electricity ,all pneumatic cleaning,100% safe

4. Up and down, around the full range of cleaning,cleaning thoroughly,high cleanliness

5. Suitable for a variety of cleaing fluid

6. Automatic cleaning,saving labor

7. The solution is repeated several times

8. Spray cleaning,governance with a condenser intact

Fixture Cleaner Washing Equipment Reflow Condenser before and after Comparison :


Cleaning Machine Cleaner Equipment Ultrasonic with CleaningThroughly,

High Cleanliness: