Chuangwei teach you how to choose suitable for your PCB Separator Machine?

PCBA (printed circuit board assembly) refers to the components have been assembled, widely used in aviation, computers, instruments and other fields. Due to manufacturing and logistics requirements, the edge of the PCBA board needs to be reserved to achieve the purpose of turnover, for the product, the process side is not required. Therefore, after the assembly of components is completed, the PCBA board edge removal process is needed.

The methods of removing the edge of PCBA plate can be divided into three categories: V-cut PCB Separator machine, PCB router machine and manual process. As to the quality of simple point of view, routing cut sub board machine (also called type pcb router machine, curve machine) had the best effect, overcomes the limitation of V-cut machine only linear segmentation, using multi PCBA high speed routing cutter according to the pre programmed path merging separate equipment, instead of cutting the defective artificial broken or V-cut, improve product quality, reduce scrap rate, disadvantage is expensive and cumbersome operation; V-cut (programming) machine much cheaper, with the blade along the PCBA V groove cutting, but only linear cutting, blade and supplies is more expensive, V-cut machine in cutting way can be divided into feed type and board type two. To manually process side by hand breaking or using pincers tools such as segmentation, has the advantages of low cost and easy to use, but easy to produce stress damage to components.

What are the types of PCB Cutting Machine?

The dividing plate machine usually refers to the PCB plate machine, that is to say, the circuit board separator. The split plate machine is widely used in electronic products manufacturing industry. Because the traditional manual folding way there will be stress strong, serious impact on the quality of the products, so the artificial plate has basically been replaced by a board machine.

The trigger points can be divided into the following: 1.cutter machine,2.punching machine, 3. laser depaneling machine, 4.V-cut PCB Separator machine.

Advantages and disadvantages of the above four types of plate splitting machine:

1. knife type plate machine advantages: low cost, shortcomings: only linear plate. Burr.

2. stamping type plate machine advantages: the first investment, low cost, fast speed. Disadvantages: due to the special plate model, high cost later. Stress

3, milling machine plate type advantages: arbitrary shape can be divided board, the stress is very small, cutting edge without burrs. Disadvantages: first large cost.

4. the advantages of laser plate machine: at the same time with milling machine plate machine advantages, and can be PCB plate differential cutting, no stress. Disadvantages: machines are expensive.

5.guillotine type sub board machine advantages: pure pneumatic (plant commonly used pressure can) (desktop), small volume, high power, aluminum plate, cut arbitrary width and the thickness of high price. Machine usually refers to the PCB machine, or circuit board sub board machine. The split plate machine is widely used in electronic products manufacturing industry. Because the traditional manual folding way there will be stress strong, serious impact on the quality of the products, so the artificial plate has basically been replaced by a board machine.